Friday, August 30, 2013

18 Things To Do with Terracotta Plant Pots (other than put a houseplant in them)








Paint and varnish. The pots would be ideal to paint up and use for holding small houseplants.

Bird Feeder. Using a small bead on a string to seal the drainage hole and then fill the pot with seeds and fat for the birds. These can then be hung upside down on a tree in winter. The frost might damage the pot though.

Easter egg holder. The pots are attractive enough to be the base for a seasonal chocolate egg, all that is needed is a bow and a fluffy chic.

Christmas planter. There are so many small Christmas plants that could fit into the small pots and be given as a gift. There are poinsettia, Christmas cacti, ivy, cyclamen and even miniature conifers. If you really wanted to add to the Christmas tat you could spray the tree with some glitter and add a bit of tinsel.

Pin cushion. Just add a ball of soft filler in a sock and push into the pot for the pins to stick into.

Drinking Cup. This would take a bit of planning but I can’t see why I couldn’t put a glass or cup inside the pot and then use it as a drinking vessel. I’d have to get the moss and salt deposits off first mind you.

Low energy light shade. The small low energy bulbs fitted on ceiling brackets can be encased with the pots giving a warm, terracotta glow to the room.

Lamp Base. Ideal because of the weight. Perfect for small shades and the light reflects off them beautifully.

Plant up with cacti. As the pots are already vintage I like the idea of them being around for a long time and not just to give a gift then be discarded. One of the best long lived plants to put in the pot would be a cacti or succulent.  My brother had small “living stones” in pots this size and some of them were well over 100 years old!

Children can paint them. This would be entertaining for a while and could be varnished over so they could cope with being wet if used as a plant pot. 
 
Mozaic. Use small pieces of coloured pot to add a pattern to the side of the pot.

Windowsill herb planter. Basil will do well in the pots as will most small growing herbs. The plants can be taken out and replaced often.

Place them in the ground and make a drip feeder. The drain hole can be sealed up then sink the pot into the ground (especially useful in a polytunnel or greenhouse) the pot can be filled with water and this slowly seeps out into the soil giving plants a continual supply of water. 

Drill holes in them. The small holes could them be planted with small bulbs or plants.

Use broken ones in fish tanks. The fish will have a lifetime of entertainment swimming through the broken pots and hiding from their friends.

Make a clay pot person to sit in the garden. I’m scraping the bottom of the barrel here although it might look OK if done well. You could put them in poses like you would a garden gnome.

Planting up bulbs such as hyacinth. This idea would be very seasonal and I would only give these to people who would replant the pot with something else later in the growing season and not throw the pot away. If I sold them to the public I would have to vet them first for their suitability for ownership!

Make a useful gift case for gloves at Christmas/Birthdays.  I think the pot would make an interesting packing container for gardening gloves. Again, vetting would need to be done to make sure the pots were used.

If you would like some handmade terracotta plant pots please follow this link..  Gumtree advert offering 500 small pots or smaller quantities. 

Friday, August 23, 2013

Bolting Early - Help from GIY






You just can’t have too many runner beans.


This month is a bit fragmented or me in the garden. Some things I am trying to speed up, like ripening the tomatoes and sage cuttings. Then on the other hand I am trying to slow down the spinach and lettuce to stop them bolting. 
 
I have three types of tomatoes growing, I can’t remember their names but some are bigger than others and they have all been left to do their own thing barring the odd comfrey feed and nipping out a few side shoots. If they don’t start to ripen soon we’ll be eating a lot of green chutney. The lettuce, mustard and spinach on the other hand has no problem maturing. I bought the “cut and come again” type, but maybe I am not doing it properly (I really don’t know if you can do these things wrong) the resulting plants are bolting even before the leaves have had time to mature.

What is Bolting?
I’ll pass you over to Michael Kelly, a freelance journalist, writer for the Irish Independent Lifestyle pages and founder of GIY (Grow It Yourself www.giyireland.com) Ireland to explain.
“Bolting is a horticultural term which refers to vegetable crops that run to seed before their time.  The plant is essentially rushing in to procreation mode - trying to spread its seed (by producing flower or seed heads) before it dies.  It is a perfectly natural part of the plant's lifecycle, but unfortunately it usually renders them inedible.”

What causes the problem?
 “It is often caused by a cold spell, changes in day length or other stress in the plant such as lack of water.  Some plants such as lettuce, rocket and annual spinach are particularly susceptible.” 
 
When does it happen?
“Though bolting occurs as the plant reaches maturity it can happen much earlier.  In annual crops this is usually caused by changes in day length but can be worsened by stressed conditions (lack of water etc).  In biannual crops it is caused by unsettled weather conditions or a cold spell early in the propagation phase. Cold nights, followed by hot days will also cause it, as will late frosts.”  

So how do we minimize the amount of bolting in our veg patch?
“Watering well and regularly is key since dry soil encourages bolting.  Delay sowing cold sensitive plants like chard, onions, beetroot until temperatures have risen or raise in modules in a greenhouse and plant out when temperatures are warmer. Succession sowings will help to beat bolting and provide a constant supply of produce.  Bolt resistant varieties are specially bred to resist bolting - examples include Boltardy for beetroot. There are also bolt resistant varieties of spinach, onions, carrots and turnips.” Michael concludes.
I’m taking Michael’s advice here and sowing new salad plants every few weeks and it seems to be working as we have had a continuous supply all summer, barring tomatoes of course.

Runner Beans
The Runner beans are prolific and are talking the place of mange tout which have all been eaten. The beans are as long as spaghetti and after being put through the slicing machine look great mixed into the pasta. They are the lads favourite vegetable and I can see why, they are soft (when young anyway) and tasty and go with most meals.

Catch the Cabbage Whites
One thing I have to do every morning is play “grab the Cabbage Whites” in the polytunnel.  Every day I am removing at least 20 of them as they tap on the plastic and look for somewhere leafy to multiply. They are after the curly Kale and broccoli of course and every day I have to check for the small yellow capsules under the leaves that soon turn into caterpillars. I’m being very lenient on these butterflies and although it’s tempting to kill them I am catching them gently and letting them go outside of the tunnel door. Right into the path of my outdoor brassicas. You have to give them a sporting chance.

There are a couple of sun loving plants mature enough for harvesting to entertain me until the tomatoes are ready.  The sweetcorn is full to bursting and this year I have grown my very first chillies.  Time for a runner bean and sweetcorn curry I think.

Wednesday, August 14, 2013

Kickstarting A Bright Idea









Vincent shows us his new Ring Weeder invention


Just occasionally I see something new on the market and ask myself “Why didn’t I think of that?”  My last great idea was back in the 80’s when I designed an automated tarpaulin sheet to cover perishable asphalt on HGV’s. The mechanism was simple and did away with all of the fiddly catches, saving the driver time enabling them to move more loads and make more money.  Unfortunately I kept the idea in my head and someone else developed it in the late 90’s. Such as life.

Some people are a bit more organised than me though and actually go ahead with an idea they have and put it into production. This “Why didn’t I” device is just one piece of moulded plastic that fits over your index finger to help you weed in awkward places.  I have lost count of the amount of gloves (all left handed) I have worn out by pressing my finger into the soil to get out weed roots.  This simple device does away with all of that. I thought it was so good I contacted the inventor Vincent Suozzi, who lives and teaches in NY to explain what exactly the device is and how it all came about.

What is the Ring Weeder and how does it work?
“The Ring Weeder is a garden tool that slips onto your index finger that helps when pulling weeds by hand in those densely planted areas where larger tools won’t fit.  The Ring Weeder allows you to get the whole root which will save you time and effort in the long run. Better weeding, fewer weeds.”

Where could it be used?
Vegetable gardens, flower beds, and every space in between, they all need to be weeded. I want to improve the process so you spend less time weeding and more time enjoying the fruits of your labour!”

How did the idea come about?
“While weeding a flower bed using a screw driver-like tool, I came up with the idea of something that attaches to my hand to make the weeding quicker and more efficient. I am right handed and didn't like to use my left hand to pull out the weed which forced me to put the tool down and then pull out the weed with my preferred hand. This made for a slow and boring process.
I misplaced this tool one day and spent twenty minutes searching for it since I didn't want to run it over with my lawn mower and risk damaging the machine or even worse: potentially hitting someone with it. That’s one reason why the first production models are bright orange!”

How did you go about developing the idea?
One day in 2012, I went to a friend called Tom Malloy who specialises in welding. After carefully explaining my idea, Tom went to work on what was dubbed "The Garden Claw" which fitted over three fingers and looked like something out of the film Edward Scissorhands!

I realised that using only one tool on my index finger along with the help of my bare thumb felt more natural and comfortable than my first idea.” I called the next design the “Garden Nail.” After testing, it was clear that rotating the nail tip under the finger greatly improved leverage and comfort. Soon after, the name "The Ring Weeder" emerged since you actually slip the device on your finger like a ring.” 

 Are you doing this on your own?
“My wife has been supporting me all the way and I have a Mechanical Engineer and Project Advisor onboard now to make sure every angle is covered in the project which really helps at this stage.  My sons have been an important part of the process too and suggested I get funding from a website called Kickstarter.com. Kickstarter is a website which helps finance creative projects by individual donation or “Crowdfunding” By placing an order for $8 you get one of the first Ring Weeders off the production line and this has given me the development funds I needed to progress.”

How much have you raised so far?
The Ring Weeder has so far raised over €20,000 of startup cash from over 820 people who have pledged money for the first ones produced.”

How will the money raised from Kickstart help with development?
“With the help of the pledges I will be able to get the tooling needed (cavity mould) and the first production run of The Ring Weeder.”

Any other ideas for the garden?
“Maybe I have a few, I’ll keep you posted!”
 Vincent is passionate about his idea and leaves us with a pearl of wisdom: “I always tell my students and my two sons to always give everything your best effort, because if you don’t, you will always have regrets.”

Pledge Now
The initial pledge on Kickstarter runs until Saturday (Aug 17th) so you still have two days to put in your pledge for the first batch.  Ring Weeder on Kickstarter.com



More stories

Related Posts with Thumbnails