The Ringweeder...What's it all about then?

Ringweeder Review

My Ringweeder arrived through the post the other day from Vincent Suozzi in America and it wasn’t long before it was adorning my index finger. The Ringweeder is a simple device invented by Vincent and resembles a two pronged fork that fits like a ring onto your finger to help weeding in small, awkward spaces and I have been eager to give it a test run after since seeing in on the Kickstarter website earlier last year. The Kickstarter project, gives members of the public the ability to invest in new innovations such as this and raised the funding to perfect the design and start production. 

The finished piece is a single, high quality plastic tool which looks to have no weak spots so common in a lot of gardening tools. 

Vincent has spent a lot of time perfecting his new tool and his idea has come a long way since he first fastened a large nail to a steel ring.   The Ringweeder comes in two sizes to suit most hands.

The Test

Finding an area of weeds in my garden to test the device wasn’t difficult!  Having the Ringweeder on my finger was comfortable and it wasn’t long before I was getting stuck in removing even long tap roots. It made me realise that for years I have weeded with my index finger intuitively and worn holes in hundreds of pairs of gloves as well as getting frustrated at not getting the weeds up effectively when I stick my finger into the hard ground. 

The Ringweeder really works. I used it for a good half an hour and it made working in awkward places in between plants very easy. If you were weeding for a long time the gloves supplied come in very useful for reducing the friction between the plastic and the skin.

 

There are a lot of devices put on the markets every year for making life a little easier in the garden, most of them disappear quickly. The Ringweeder seems different. Vincent has actually seen a real gardening problem and found a solution. It was a gardening problem which I didn’t even know existed!

The Ringweeder will also be extremely useful for people with disabilities as no gripping is needed unlike trowels and other hand tools.

I think this simple device has the ability to be a regular ‘must have’ tool in the garden, it doesn’t require fuel to use, needs no maintenance, doesn’t take up any room and can be bought for less than six euro. Check out theringweeder.com

Hypertufa Obsession

Tufa Obsession

Since last week I have spent an obsessively long time attempting to perfect my Hypertufa plant pot mix.  I started off by making the sample pots from just peat, cement and pearlite. All seemed well but when the dried out I found they were lightweight but also too fragile for any real use. They would be good for planting into the ground complete with a young plant but that’s not what I am looking for, I want a pot that can stand up to the rigors of everyday use.  

So it was time to roll my sleeves up and play with different types of mixes. I used less peat, more cement and also added some sand. One review I read about making tufa commented that the best way to get a strong plant pot was to not use peat!  To me that defeated the object of producing tufa pots but I did do one or two without it.  The results were strong but did look like miniature concrete council road bollards, again, not what I was looking for.

One to One

The tunnel is now full of pots of various sizes and consistencies. I am having a bit more success with a 1x1x1x1 mix of sand, peat, pearlite and cement but my biggest problem was getting the set pots out of the molds. I started off by filling a larger pot and then pushing a smaller pot into this to make the recess. All seemed well until the mix set – the pots are stuck in!  The only ones I could get out were the plastic pots as they have a bit of flexibility but not the aesthetic values of the terracotta pots I am also using. 

I therefore had to think of a way to keep the shape of the terracotta pots but have the flexibility of the plastic ones. 

My solution is this. I got some very large pots and filled them with expandable foam then placed a terracotta pot inside this and let it dry.  The resulting hard mold is light and flexible. For good measure I have also made some molds out of sections of cut drainpipe with slits in them fastended by cable ties. These can be pulled open when the mix has set.

It’s still early days with the new methods but I am optimistic I will 

have a product that will look good on the dining table as well as in the garden. Again, I’ll keep you posted.